Browse products by name
Adimec has launched the first member of its new CMOS-based Sapphire series, S-25A30
Edmund Optics has introduced S-mounts to its line of C- and T-mounts. These eight product lines include lens mounts, tubes, spacers and S-to-C adapters to accommodate a wide variety of end uses
Hamamatsu Photonics has introduced the new S10200 TDI (time delay integration) sensor, featuring 90 per cent peak quantum efficiency to visible light, with high UV and near IR sensitivity.
Hamamatsu Photonics has introduced a new design of back-thinned linear CCD image sensor utilising a resistive gate structure, with 'on chip' electronic shutter function
Viscom has launched the S2012PV, its first dedicated optical inspection system for solar cell production. The S2012PV is suited to applications such as wafer material inspection, cell characterisation and final cell control.
Viscom has introduced the S2088-II, a compact tabletop system designed for automatic optical inspection of paste print and pre- and post-reflow soldering.
Viscom has released the S2088BO-II, a desktop system for automatic optical wirebond inspection
Viscom now offers the S3016 inspection system for inspecting electrical assemblies from below. This system is available with 8M camera technology
Viscom has released the S3088 Flex system as an enhanced model to the S3088-III. Like its predecessors, the S3088 Flex is distinguished by a highly effective electronics assembly inspection
Viscom has upgraded its successful QuickScan solder paste inspection system on a new platform, the S3088-II QS. Viscom's illumination technology has been integrated into the system, along with new camera technology
Viscom has released its S3088-III AOI system, the newest version of the S3088 system family. This AOI system is optimised for fast, highly accurate solder joint inspection with high inspection depth.
Viscom has introduced its 3D paste inspection system S3088VPI. The 3D technology for paste quality control provides precise measurement technology and offers reliable paste print inspection
The new S5LPJ8210 from Sill Optics is a large double-sided telecentric lens. Due to its symmetrical setup, the lens has very low distortion (less than 0.01 per cent).
Sill Optics has introduced a thermal imaging lens with 50mm focal length and an f-number of 1.5
Sill Optics has released the S6IRI154x, a precision LED condenser with aspheric surfaces that is compatible with the reliable standard S6IRI153x condensers.
Hamamatsu Photonics has introduced the S8866 series of silicon photodiode arrays combined with a CMOS signal processing chip.
Aqsense's latest version of SAL3D software allows seamless integration with 2D machine vision libraries
Aqsense has released a new version of its SAL3D 3D vision software
Aqsense has introduced a new module as part of its SAL3D 3D vision software library. The Area Tool automatically determines the volume of scanned objects at high speeds
Aqsense's library for cloud of points acquisition and manipulation, SAL3D, now supports Mesa's leading 3D time-of-flight (TOF) cameras
AutoVimation has extended the accessory range for the Salamander series of protective camera enclosures
Autovimation has developed the new, IP67-protected Salamander housing series for small compact cameras with cross sections between 29 x 46 and 36 x 36mm
Dalsa, a provider of machine vision technology, has advanced the colour capability of its Sapera Essential software for machine vision applications.
Dalsa Sapera Essential's advanced Pattern Finding tool quickly and accurately recognises multiple objects and patterns, regardless of orientation and scale.
Dalsa has enhanced its Sapera vision software with its Nitrous and Sapera Architect Plus platforms
Dalsa has introduced its latest Sapera Processing software, including a new colour tool – a suite of colour image processing classes for machine vision applications.
Alrad Imaging has introduced a range of industrial thermal imaging cameras from Guangzhou SAT Infrared Technology (SatIR)
Electro-Optical Products Corporation (EOPC) has developed the SC-3, a miniature electromagnetically-driven moving mirror device, which deflects a light beam with a continuous sinusoidal motion
Flir ATS has launched its SC2600 near infrared (NIR) camera for the research and science community
Olympus has introduced the SC30 colour camera for microscopy imaging. The camera is easy to use and provides high resolution and quality, thereby ensuring outstanding colour reproduction.
Flir Systems has introduced its SC35, SC15 and SC5 camera packs for research and development applications
Flir Systems has launched SC650 and SC450 thermal imaging camera packs for scientific research and development
Flir has released the SC655 high-resolution uncooled infrared camera. It provides high-speed windowing modes, digital control of image flow and recording in Flir ResearchIR R&D software
Flir has released the SC660 thermal imaging camera, offering superior thermal and visual image quality, spot size resolution and temperature measurement accuracy
The Flir SC7000 series of infrared cameras from Flir Advanced Thermal Solutions (ATS) provide the high performance for thermal imaging of high speed events
Flir Advanced Thermal Solutions has developed the SC7100 NIR camera, a multi-spectral near infrared camera for high-end R&D applications
Flir Systems has released the SC8400 and SC6500 series thermal imaging cameras, designed to provide excellent measurement performance together with advanced connectivity
Basler is launching new models in the successful Scout series - the scA1600-28 models deliver 28fps at 2 Megapixel resolution
Aicon has introduced ScanReference, a measuring system enabling a fast and simple measurement of reference points
TM Robotics has launched a new Toshiba Machine Scara robot in the UK and European markets. Called the TH250A, it offers improved speed compared to existing robots in the range.
Media Cybernetics has released Scope-Pro Express Version 6.3, a plug-in module for Image-Pro Plus and Image-Pro Express image processing software that allows users to easily acquire and save image volumes.
Sofradir, a manufacturer of advanced infrared detectors for military, space and industrial applications, has released its Scorpio LW 640 x 512 IR detector
The Scorpion 3D Modeller from Scorpion Vision Software has been launched, which uses grey coding and phase shift (GCPS) techniques and is available as an option to Scorpion Vision software 6.0.
Tordivel has released a product to support all SmartCams from Sony. Scorpion 3D SmartCam is a fully integrated and compact solution ideal for machine builders and OEMs
Tordivel has released Scorpion 3D Stinger for Robot Vision, software designed for robot part picking from a conveyor belt, a pallet or a crate
Tordivel has released the automation software Scorpion 3D Stinger for Robot Vision, which is designed to solve robot part picking applications
Scorpion Vision Software has been completed with extensive 3D support and the most advanced 2D and 3D solutions are made without any kind of programming.
Norwegian company Tordivel is launching what it describes as a new concept - the Scorpion Compact Vision System
Tordivel has released a new product range: Scorpion Mono Stinger. Scorpion Mono Stinger is all the hardware and software needed to build a vision sensor
Tordivel has launched the Scorpion Pizza Sorting System. The modular system comprises a conveyor, an ejector unit, machine vision hardware and software.
Scorpion Vision has introduced the Scorpion SmartCam3D, a smart camera primarily designed for use in industrial automation for manufacturing purposes.
Tordivel has released Scorpion Vision 8.0, a software platform with a strong focus on 3D machine vision
Scorpion Vision Software 8.0 from Tordivel supports the Scout and Ace range of GigE cameras from Basler Vision Technologies
Tordivel and Sick AG have released an interface which means the entire functionality of Sick 3D cameras with Gigabit Ethernet interface is available with Scorpion Vision software
Scorpion Vision has released version 7.0 of its system software tool for industrial vision suited to working with Sony Smart cameras, digital cameras with USB, FireWire and GigE interfaces as well as 3D image sensors.
Tordivel has released Scorpion Vision Software 8.1
Tordivel has released Scorpion Vision Software 9.0, with a focus on usability, 3D machine vision, open-source and OEM integration. Scorpion Vision Apps have also been introduced
Tordivel has released an update to its Scorpion Vision Software Version X with focus on improvement and usability for the Scorpion Vision Apps and supporting the Scorpion Compact Vision System platform
Tordivel has extended its smart camera support for its Scorpion Vision software with Ximea's Currera
Tordivel has released a major new version of Scorpion Vision Software with focus on 3D machine vision and Microsoft Windows 8.0
Basler has expanded its Scout series with four new camera models based on Sony's high sensitivity ICX445 CCD sensor. Customers can choose from 11 CCD and one CMOS imaging sensor.
Basler is adding a new Auto Features Suite to its Scout and Pilot camera series, to include automatic gain control, automatic exposure control and automatic white balance control.
Basler has introduced its new Scout camera family, which is equipped with assorted CMOS image sensors. The first model will be the Micron MT9V022 sensor offering VGA resolution and 60fps.
Basler Vision Technologies has expanded its Scout series with four new camera models based on Sony's high sensitivity ICX285 CCD sensor. The cameras feature a 30fps image capture rate.
Basler has expanded its Scout series of cameras with four new models based on Sony's ICX445 CCD sensor.
Basler Vision Technologies has launched four Scout camera models based on Sony's ICX618 sensor.
Basler Vision Technologies has added the Scout Light series to its product portfolio. This series consists of four new camera models based on Sony CCD sensors and Micron's MT9V CMOS sensor.
Multipix Imaging, a distributor for Basler, is adding the Scout Light series to its product portfolio. The series consists of four new camera models based on Sony CCD sensors and Micron's MT9V CMOS sensor.
Multipix Imaging now supplies Basler's expanded Scout series. The four camera models are based on Sony's high sensitivity ICX285 CCD sensor and feature a 30fps per second image capture rate.
Basler has introduced the GigE Scout2 camera family with Power over Ethernet (PoE) and a novel colour image enhancement concept with advanced colour features
In support of its CoaXPress frame grabbers, BitFlow has introduced SDK 5.70, a flexible application framework that will allow system integrators to develop machine vision applications quickly and easily in the CoaXPress standard
Allied Vision Technologies has expanded its Software Development Kits (SDKs) for 64-bit Windows operating systems
SVS-Vistek has released an updated version of its software development kit offering improvements for its SVCam GigE camera lines. The SDK facilitates the integration of cameras into the customer's software.
VRmagic has integrated a plug-in for the open source GStreamer library in its Software Development Kit
VRmagic has launched version 3.14 of its Software Development Kit. The SDK offers a simple machine vision image processing library for all VRmagic's camera models
BitFlow has upgraded its Software Development Kit (SDK). Version 5.60 offers full support of 32-bit applications on 64-bit Microsoft Windows machine vision systems
E-con Systems has launched the See3CAM, a UVC-compliant USB 3.0 camera
LMI Technologies has introduced the Selcom High Speed RoLine 1130 sensor for high-speed pavement profiling to the European market.
Edmund Optics is providing an online tool to help customers find the video lens that best matches their imaging needs. It porovides a unique five-point rating of each lens.
Image sensor specialist Andanta now offers Indium Gallium Arsenide (InGaAs) image sensors with extended spectral response down to 800nm (semi-VIS sensor) instead of 900nm (standard sensor)
EVT has introduced the SemiCheck sensor. The sensor, complete with the ChipControl command set, was developed specifically for the semiconductor industry
UTC Aerospace Systems, a unit of United Technologies, has launched the next-generation Sensors Unlimited shortwave infrared digital line scan camera for spectral domain optical coherence tomography
Alrad Imaging has added new PoE (Power over Ethernet) and PoEHS (HighSpeed) models to the Sentech GigE Vision family of cameras
Alrad Imaging has introduced the Sentech STC-GE/GEC camera series, which includes both colour and monochrome cameras
PPT Vision has introduced the Sentinel Mold Protection Solution, which offers the manufacturing industry a solution to protect mould presses and tooling, avoiding expensive repairs and minimising production downtime.
Rad-icon Imaging, a division of Teledyne Dalsa, has introduced the Shad-o-Box 1280 HS x-ray camera
Andor Technology's Shamrock spectrograph wide-aperture slit provides a flexible and modular approach to microspectroscopy
Dalsa's improved iNspect and Sherlock software packages, available through Stemmer Imaging, enable imaging systems to be used cost-effectively in many fields and by users with any level of knowledge
Specialised Imaging has launched a new version of its Trajectory Tracker video tracking system to correlate high-speed video data with 3D visualisation and measurement information
Specialised Imaging has extended the capabilities of its SI Trajectory Tracker for tracking projectiles with unpredictable flight behaviours
Specialised Imaging has launched a range of high power Xenon flash units optimised to give a small concentrated high intensity beam for use with ultra high-speed cameras
Specialised Imaging, a manufacturer of ultra high-speed imaging systems and components, has introduced the SIL-2 family of high performance, gated image intensifier systems.
Silicon Software's fast PCIe x4 frame grabber now supports Basler's A406k/kc camera at its full bandwidth
Cedip Infrared Systems has provided new components for its Silver IR cameras with long-life batteries and integrated screen options.
Specialised Imaging's new SIM Cerberus system can control up to 32 individual ICCD cameras, at framing rates up to 200 million frames per second
Specialised Imaging has developed the capability on its SIM ultra-fast framing camera to make precise temperature measurements at different points in a high-speed event
The new SIM-02 multi-channel framing camera from Specialised Imaging incorporates high-resolution image intensifiers with double pulsing techniques an excellent optical design.
Specialised Imaging has announced the introduction of SIM-D, an ultra-fast framing camera. The new compact system combines ease of use, ease of maintenance and high performance.
Specialised Imaging has released its SIM-D ultra fast framing camera in a multispectral imaging configuration
Specialised Imaging has added a new auxiliary viewpoint option to its SIM-D ultra-fast framing camera
Specialised Imaging has upgraded its SIM02 multi-channel framing camera with a new multi-spectral imaging configuration
Siemens Industry Automation Division has launched the Simatic MV440 1D/2D code readers, suited to reading data matrix codes, such as direct part marks (DPMs) on objects under difficult ambient conditions.
Firstsight Vision has released a simple XGA output colour camera.
Specialised Imaging has released the SIR3 ballistic range camera, an ultra high-speed camera
Rad-icon Imaging has introduced the Skia-Graph 8 radiation sensitive camera. It consists of eight CMOS sensors tiled in a 2 x 4 matrix for a total active sensing area of 8 x 8 inches.
SVS-Vistek has introduced a family of cameras (SLC) ideal for space restricted applications. The cameras reach high frame rates, provide an excellent signal-to-noise ratio, and are enclosed in a small housing.
Videor has released the SLC-100P camera from its Solvido range. The camera is fitted with a Digital Pixel System (DPS) technology and is ideal for monitoring automated welding procedures
Applied Vision has engineered a vision inspection system for identifying physical damage to plastic slip sheets used in the material handling of food and beverage containers
Photonfocus' intelligent camera SM2-D1024-80 is supported by Halcon 9.0 software from MVTec Software. Photonfocus is member of the MVTec partner programme.
German-based company Matrix Vision offers three different smart cameras: mvBlueLYNX, mvBlueCOUGAR-P and mvBlueLYNX-M7.
Vision Components' smart cameras are compatible with the latest version of Halcon image processing library from MVTec.
EVT has launched its new vision sensor, Smart Inspect, which is suitable for machine vision use in a wide range of industrial applications
Meta Vision Systems has launched a laser seam tracking system that applies the company's latest sensor technology to welding machine applications
The Stemmer Imaging Group has been appointed by VCubed as the European distribution channel for its entire range of intelligent light sources. Firstsight Vision will be selling the components in the UK.
Silicon Software has released SmartApplets hardware programming as a partial solution for applications for its V-series frame grabbers.
PerkinElmer Optoelectronics has released two new models of the SmartBlue line scan digital camera range, with resolutions of 512 or 1,024 pixels, and high data transmission rates of up to 40MHz.
Toshiba Teli America has introduced the SmartDragon image processor, which can connect and simultaneously receive data from up to four FireWire-B (IEEE1394.b) colour or black and white cameras.
Framos is distributing Smartek's Giganetix camera series. The fully GigE Vision compliant hardware and driver interface combined with a compact housing at 35 x 35mm footprint provides seamless integration in existing cost-sensitive systems
Breuckmann's versatile SmartScan 3D scanner for solutions ranging from contact-free scanning for reverse engineering to automobile design and quality control of components and serial parts
OGP UK has released a highly stable, moving slant bridge 3D measuring centre, promising high levels of productivity in component measurement
As a result of the increasing need for telecentric lenses with high magnification, Moritex has developed a new micromachine lens, the SOD-10X.
IDS has released a software interface for Cognex's VisionPro and Cognex Vision Library (CVL). The interface supports all cameras that make up the uEye family.
Vision Components has introduced a software library for its smart cameras that enable camera-supported production monitoring and quality control in solar wafer production.
Cognex has launched software that expands the decoding capabilities of the DataMan 100 vision-based ID readers and provides additional code support for all models in the DataMan product family
Viscom has introduced software release 7.43. The update contains new features and useful additional functions for programming and inspection mode
Viscom, a manufacturer of wire bond inspection systems, has introduced new software tools for its VHR (Very High Resolution) camera module, which has the ability to provide exact measurements of balls and wedges
IDS Imaging Development Systems has released a comprehensive software update for all uEye camera series
IDS Imaging Development Systems has released a free software update for its USB uEye XS industrial camera
EVT has introduced the software plug-in, SolarEye, for its EyeVision software. The plug-in was developed for solar cell inspection.
Isra Solar Vision has released Solarscan-Bevel for the inspection of solar cells after printing and before firing
Isra Solar Vision has introduced the Solarscan-EL Multispectral Dual, a system for the inspection of solar cells
Isra Solar Vision, a business unit of Isra Vision, Darmstadt, Germany, has introduced a new generation of contactless photoluminescence (PL) inspection systems, Solarscan-Yieldmaster PL
Opto, a German-based manufacturer of optical systems and components, has launched its Solino Yellow Line catalogue. The catalogue comprises a selection of some of Opto's optical inspection systems.
Stemmer Imaging now supplies the Sony FCB E series of colour block cameras with GigE Vision and GeniCam functionality
Tordivel now supplies the SNC-CS20 and SNC-CM120 network cameras from Sony. These models are suitable for robot vision integration, among other applications.
Stemmer Imaging now offers one of the world's smallest FireWire (IEEE1394b) cameras for machine vision and robotic applications. The monochrome Sony XCD-MV6 measures just 19mm in depth and weighs only 37g
Sony's XCG series cameras with GigE vision interface for machine vision applications are supported by Scorpion Vision Software from Tordivel.
Stemmer Imaging is now distributing Sony's EVI range of pan, tilt and zoom colour video cameras
Scorpion Vision has added Sony's high quality XCG digital camera series to its product portfolio.
Smart Vision Lights has released a series of LED structured light projectors
Specialised Imaging has introduced a digital shadowgraph. The camera reveals temperature and chemical differences in transparent media, providing engineers with detailed information about aerodynamics and flow mechanics.
Specialised Imaging has introduced the Specialised Imaging Shadowgraph (SIS) camera enabling high resolution digital imaging of ultra fast events in ambient as well as low light environments.
Specim Spectral Imaging has released its SpecSensor SDK for the company's hyperspectral sensors
The SpectroCam Multispectral Imaging (MSI) camera is now available from Ocean Thin Films (OTF) in a new development platform that combines a scientific-grade CCD array with a precision rotating optical filter wheel
The SpectroCam multispectral imaging (MSI) camera from Ocean Thin Films (OTF) is now available with powerful analysis software
The Inspection Technologies business of GE Measurement and Control has released the Speed|scan AtlineCT system, providing 3D CT inspection
Viscom's SPI inspection systems have been equipped with CyberOptics' 3D SPI sensor technology. The development and supply agreement allows for the integration of CyberOptics SE500 sensor technology into the Viscom PCB inspection platforms
AutoVimation has released the Spider and Albatross illumination adapters enabling users to attach almost any illumination type to the company's versatile MMVI construction kit
ISVI has introduced two split cameras: a 5 Megapixel, 30fps model and a 10 Megapixel, 15fps model
Soliton Technologies has launched the Spot-It v2, part of the third generation of the Spot-It range of smart cameras and embedded vision systems.
Basler has started series production of the first members in the new sprint camera family. The new Basler sprint family of line scan cameras includes members with 2k, 4k, and 8k resolution.
Basler Vision Technologies has introduced the Sprint 8k, a new member of the Sprint line scan camera family. A dual line CMOS sensor design provides outstanding image quality.
Basler has introduced new members of the Sprint and Runner line scan camera families.
Basler Vision Technologies is expanding its high sensitivity Sprint line scan family by adding colour variants with the resolutions of 2k, 4k and 8k.
Spot Imaging Solutions, a division of Diagnostic Instruments, has released the SprintPic macro imaging system
Dalsa has launched a GigE Vision-compliant version of its Spyder 3 line scan camera. The Spyder 3 product family uses Dalsa's dual line scan sensor technology.
Dalsa's Spyder 3 CL line scan camera with Camera Link interface has three times the response rate and twice the speed of its predecessor, the Spyder 2, while still maintaining low noise levels.
Dalsa has expanded its Spyder3 camera family to 4K resolution. The higher resolution offers a larger field of view and reduces system costs, as fewer cameras are needed for a vision system.
Teledyne Dalsa has released optimised performance and improved functionality of its Spyder3 Camera Link and GigE Vision-compliant dual line scan cameras
Dalsa, a global leader in machine vision technology, has introduced the Spyder3 Color camera providing high colour fidelity, ease-of-use, and affordable solutions for the colour imaging market.
Dalsa has introduced a GigE Vision-compliant version of its successful Spyder3 Color camera
Baumer has introduced a Starter Kit Package designed for use with the TXG camera series.
Vision Components has developed a prototype of a stereo camera suited to a wide range of applications. The unit features two camera heads equipped with Sony CCD sensors
NIT has introduced a stereoscopic camera based upon its global shutter high dynamic range CMOS sensor NSC1001
Docter Optics has introduced the Stilar 2.8/8, a super-wide-angle C-mount lens designed especially for use with 1.2-inch sensors and the Auto-Tessar series provides reflection-free images from 1.2-, 1/2-, and 1/3-inch sensors.
Firstsight Vision has launched the Stingray series of cameras from Allied Vision Technologies. The cameras combine the functionality of the Pike family with the sensors and compact size of the Marlin series.
The Stingray camera family from Allied Vision Technologies (AVT) is now complete. The 'transformer' camera Stingray was designed modularly to adapt quickly, simply, and economically to almost any application.
Coherent has introduced its Stingray range of diode laser-based line generators. These laser projectors enable the construction of fast and accurate machine vision systems that utilise 3D triangulation
Alrad has introduced the StingRay range of diode laser-based line generators from Coherent
Allied Vision Technologies has added two versions to its successful Stingray camera family: the Stingray F-125 and Stingray F-504 with 1.3 and 5 Megapixels respectively.
Allied Vision Technologies has introduced the Stingray GE with GigE Vision interface, adding to prior FireWire interface variations available in the camera family (IEEE 1394b with copper or fibre optic)
The Stingray camera from Allied Vision Technologies is now available from Stemmer Imaging in a version that has no cover glass over the sensor
Norpix has expanded its StreamPix 5 software to include particle image velocimetry (PIV) functionality. PIV is an advanced flow visualisation method used across a wide variety of industries
NorPix's StreamPix 5 multi camera digital video recording (DVR) software now supports the Rugged 3U server from Crystal Group
NorPix has introduced StreamPix4-8x100, a turnkey system providing simultaneous, synchronised image capture from eight cameras to a single computer using a GigE Vision interface.
Framos is distributing the latest models within the Strobe Controller series from Smartek
Framos is now supplying the Strobe Controller (SC) series from Smartek, which provide excellent switching capacities and precision for industrial machine vision applications
Seikowave, with headquarters in Lexington, Kentucky, has released a $2,000 structured light scanner that meets or exceeds specifications of similar scanners sold at ten times its price, the company claims
Applied Image, based in Rochester, New York, has launched three analytical software programs from the providers of image quality measurement software, Imatest: Studio 3.0, Master 3.0 and API 3.0.
SUI (Sensors Unlimited, Inc.) has introduced the new SU-LDH digital line scan SWIR Camera for spectroscopy and machine vision applications.
Sensors Unlimited, part of Goodrich Corporation, has introduced the shortwave infrared (SWIR) SU-LDH digital line scan camera.
Sensors Unlimited, Goodrich ISR Systems has released the SU1024LDH2, a high-speed, digital line scan SWIR-indium gallium arsenide (InGaAs) camera
Sensors Unlimited - Goodrich ISR Systems has launched a compact SU1024LDM line-scan camera featuring high resolution, 1,024-pixel imaging in the shortwave infrared (SWIR)
Sensors Unlimited has introduced the SU320HX shortwave infrared camera, designed for rugged military imaging applications
Goodrich's ISR Systems Princeton team (formerly Sensors Unlimited) has introduced the high sensitivity, shortwave infrared (SWIR) uncooled video camera for military imaging systems, covert surveillance and marine intelligence applications
Sensors Unlimited - Goodrich ISR Systems has released the SU640KTS, a large-format, InGaAs high-resolution shortwave infrared snapshot video camera
Sundance Multiprocessor Technology has created a new version of its SMT370 interface, reengineered into an industrial variant.
Framos now offers HDR-optimised lenses from Sunex specifically designed to cut down on stray-light phenomena, such as ghost images, flare, veiling glare, and starbursts
The Super Optical Device 3 from Moritex is a high performance unit optimised for vision and inspection applications that require mounted lens and lighting.
StingRay Optics, developers of custom optical solutions, has introduced the all-refractive SuperBand Optic
Matrox Imaging has equipped the Matrox Supersight e2 high-performance computing (HPC) platform with ATI FirePro Professional Graphics from AMD
Matrox Imaging has released a new high-performance computing platform
Point Grey Research and Fresco Logic, a global fabless semiconductor company that designs, develops and sells USB 3.0 (SuperSpeed USB) connectivity solutions, have jointly launched a SuperSpeed USB-enabled digital video camera.
Specialised Imaging has released SureShot real-time hardware for its SIR2 camera that enables researchers to accurately record and analyse projectiles with unpredictable velocities.
Tamron, based in Saitama, Japan, has introduced a concept model of a security/surveillance camera unit, which renders flat-field images while capturing a 180° field of view with no blind spot in any orientation
Epix has introduced the SV5C10 12-bit colour and the SV5M10 12-bit monochrome 5-Megapixel 10fps cameras. They can be externally triggered or free run.
SVS-Vistek has launched SVCam-ECO, a camera family which extends the company's own camera line by 8 ultra-compact cameras using Gigabit Ethernet.
SVS-Vistek has introduced its camera family SVCam-GigE, designed according to the new international GigE Vision standard. The cameras are available from VGA, XVGA, one, two, four up to 11 Megapixel resolution.
SVS-Vistek has introduced SVMonitor, a high-speed digital image recorder that is able to record and store videos with or without a time stamp.
SVS-Vistek has expanded its SVCam camera line with an 11 Megapixel model (svs11002-12) with 12-bit data format and Camera Link interface.
The svs16000 from SVS-Vistek is the first 16-Megapixel camera in its product line. This progressive-scan camera with a resolution of 4904 x 3380 pixels uses an Interline-Transfer-CCD from Kodak.
SVS-Vistek has introduced its new Gigabit Ethernet 16-Megapixel camera, the svs16000. The camera features an optional second Ethernet output allows users double the bandwidth of data transfer.
SVS-Vistek has released an ultra high-speed version of the 16 Megapixel camera SVS16000-U. The progressive-scan camera is equipped with an Interline Transfer CCD sensor from Kodak with a diagonal of 43.3mm.
SVS-Vistek has released the svs340 (640 x 480 pixel), a high-speed camera with Camera Link (base configuration) or GigE Vision interface
SVS-Vistek has introduced the svs414, a new model in its SVCam series. It is a progressive-scan camera with a resolution of 640 x 480 pixel and Camera Link interface.
SVS-Vistek's monochrome 5-Megapixel camera svs625 is now available with a GigE Vision interface, meaning frame grabber boards are no longer necessary to transfer image data.
SVS-Vistek has introduced its 8 Megapixel camera with GigE technology. The svs8050 takes advantage of the 4 tap CCD sensor.
SVS-Vistek's camera line SVCam-HR has been upgraded with new models. Two new products, the svs8050 and the svs4050 with dual GigE-Vision interface have been launched
AMS Technologies has launched a 200kHz Swept Light Source for optical coherence tomography imaging
Stemmer Imaging has boosted its range of infrared (SWIR and NIR) sensitive cameras with the addition of new models from Xenics, Allied Vision Technologies, IDS, JAI and Teledyne Dalsa
Sensors Unlimited, part of Goodrich ISR Systems, has introduced two cameras with advanced imaging enhancements that expand the dynamic range of short wave infrared (SWIR) imagery
Sensors Unlimited, part of Goodrich Corporation, has introduced the SWIR SOLO 50, a high performance SWIR optimised 50mm lens for advanced imaging in the 0.7 to 1.7 micron spectral range.
Baumer has introduced the SX cameras incorporating Kodak's high performance CCD sensors
Baumer's SXG cameras combine Quad Tap sensors from Kodak with the innovative Dual GigE technology
Horiba Jobin Yvon has introduced three new ranges of multichannel detectors: the Symphony arrays with LN2 cooling, the Synapse arrays with thermoelectrical cooling, and the Sygnature ambient temperature linear detectors.
Matrox Imaging has introduced system host boards (SHB), using the latest Intel Xeon 5600 series processors, for use with its high performance computing platform Matrox Supersight e2
Not listed? Click here