Browse products by name
Firstsight Vision now offers four new digital progressive scan CCD cameras from JAI, offering nearly twice the frame rate compared to many models on the market, yet maintaining full resolution and high image quality.
Automation Technology now offers a thermographic inspection system for non-destructive testing of composite materials
Edmund Optics has introduced new C-mount focus-tunable lenses. These versatile lenses are ideally suited to a wide variety of imaging applications
Microscan has introduced a new C-Mount lens configuration for two of its products: the QX Hawk imager and the Vision Hawk smart camera
Tamron Europe has introduced a new line-up of its 0.5-inch C-mount lenses. These include f=4-12mm F/1.2 (12VM412ASIR) and f=10-40mm F/1.4 (12VM1040ASIR), which can be used for 0.5-inch size sensor cameras.
Basler has added a C-Mount option to the Basler Runner Gigabit Ethernet line scan camera family. This series now also includes six C-Mount monochrome models with 1k and 2k line scan CCD sensors.
Hamamatsu Photonics has introduced the C10000-401 TDI CCD camera, featuring high speed, and high sensitivity, back-thinned CCD image sensors.
Hamamatsu Photonics has introduced the new C10000 TDI (time delay integration) board-level CCD camera that features a high speed, high sensitivity, back-thinned CCD image sensor.
Hamamatsu Photonics has introduced the C10633, an InGaAs camera featuring spectral sensitivity in the infrared region from 900nm to 1700nm.
Hamamatsu Photonics has introduced the C10800 series of 'dual energy' X-ray line scan cameras, specifically designed for imaging materials and objects requiring improved detection and composition classification
Hamamatsu Photonics has introduced the C10910 streak camera series for UV to near-infrared measurements of extremely fast light phenomena
Hamamatsu Photonics has introduced a new streak camera with sensitivity in the near infrared region up to 1,650nm
Hamamatsu has introduced the C11440-50B board level camera for OEM scientific and industrial customers
Available from Alrad Imaging, CMOS Sensor has introduced two image sensors with selectable resolution for use in Contact Image Sensor (CIS) modules
Automation Technology has launched what it describes as a new generation of high-speed 3D sensors
Polytech has introduced a high performance multi-sensor gimbal for airborne surveillance missions. The compact new gimbal is only 11 inches in diameter and is perfect for use with light helicopters and drones.
JAI has released two new members of the C3 Basic series of cameras. The 1.4 Megapixel cameras are well-suited to outdoor applications characterised by wide ranging and continuously changing lighting conditions.
JAI has released four new members of the C3 Compact series with Mini Camera Link and PoCL interfaces.
Firstsight Vision has added the C3 family of robust laser scanning cameras from Automation Technology to its product line. The cameras offer outstanding speed and resolution for 3D imaging applications.
Automation Technology has introduced the C4 camera series, which features a fast, high-resolution 3D sensor
Automation Technology has introduced the C4-1280 GigE camera, featuring a high-resolution 3D sensor. The new model has a resolution of 1,280 x 1,024 pixels, and delivers up to 71 profiles per second
Automation Technology has extended its C4 camera series of high-speed 3D sensors. The new C4-2040-GigE delivers more than 66 million 3D points with a profile frequency of up to 32kHz
Automation Technology has introduced new models to its C4 camera series. The FPGA-based cameras profile data through laser triangulation
Hamamatsu Photonics have launched the sub-nanosecond C7164-03 gated ICCD, which can achieve minimum gate times of 250ps with a gate repetition rate of 10kHz and a delivered frame rate output of 8Hz.
Northwire's MVC 1394b FireWire, DataCell GEV-1000 Gigabit Ethernet, CCXC Analog, and Camera Link cables have undergone rigorous testing for flex life and durability, proven by the Northwire Standardized Flex Testing Protocol (NSFTP).
Aqsense has released a CAD import tool as a module of the SAL3D library that allows any user to generate a cloud-of-points from a CAD file easily
Pyser-SGI has introduced a new multi-feature calibration standard for machine vision and image analysis systems. Multiple images and scales on a single slide provide a cost-effective solution to calibration checks.
The German high tech company Nextsense has developed an opto-electronic single-handed meter that detects different profile shapes with no contact using a board-level camera from IDS Imaging Development Systems
Vision and Control has released software developments for its Camat compact vision systems
Image processing specialists Vision & Control has extended its vision sensor platform Camat to include the new generation of vision sensors, Camat S48 Multi-Head.
Kane Computing has signed an exclusive distribution agreement with Imaging Diagnostics to market and sell its range of Camelot intelligent machine vision cameras in the UK
Stemmer Imaging has boosted its portfolio of products for use in the food industry with the addition of a wide range of camera and lighting housings
Toshiba Imaging Systems Division, a provider of high definition (HD) industrial camera technology, has released two camera control units (CCUs) designed to operate with the remote head, high definition IK-HD1.
Adimec is now offering customisation services focused on enhancing the accuracy of the high-performance image sensors found in its cameras
W. L. Gore and Associates (Gore) has released the Gore Camera Link High Flex Flat cable for use in Infini Flex cable assemblies manufactured by Intercon 1.
Vivid Engineering has launched five supporting products for Camera Link applications
Teledyne Dalsa has released a Camera Link version of its Piranha3 16k CMOS line scan camera
Flir ATS (Advanced Thermal Solutions) has changed its camera range names to finalise its integration within the Flir group.
Camera manufacturer Gevicam has introduced several models to its camera line-up.
For OEM applications with tight or angled installation space, VRmagic has introduced a camera with an offset and sensor that can be freely positioned.
Armstrong Optical offers a range of camera systems for testing infrared lenses by interferometry, which cover all the common infrared wavebands.
Allied Vision Technologies (AVT) now complies with the ISO 13485:2010 norm for the development and production of digital cameras and components used for image processing in medical devices
German camera manufacturer VRmagic now offers a back end for its Linux-based intelligent cameras with Picoblade miniature connectors for Ethernet, USB 2.0 Host, RS232, and general purpose I/O, analogue video output
German company FiberVision has launched its Caminax machine vision system, which includes its own graphical interface.
Optronis has launched the CamRecord CR high-speed camera series. Its compact design offers excellent performance and flexibility for the visualisation and analysis of high-speed phenomena.
E-con Systems, a leading embedded design services company specialising in development of advanced camera solutions, has released a stereovision camera reference design
With newly added functions and icons, version 2.5 of CapturePro control and image acquisition software optimises the operation control of ProgRes microscope cameras from Jenoptik Laser, Optik, Systeme.
Cedip Infrared Systems has announced the Carthage series of advanced video processing modules for researchers and integrators looking to develop and build their own thermal imaging systems.
Varioptic, a Business Unit of Parrot SA, has launched a series of imaging products based on its electro-wetting technology
The Imaging Source has launched a catalogue containing the complete spectrum of its products, including more than 100 new GigE, USB 2.0, FireWire, and zoom cameras.
Firstsight Vision is distributing a new timing controller for machine vision applications. The CC320, from Gardasoft Vision, is compliant with GigE cameras, allowing a network-centric approach to control structures.
The Imaging Source, a manufacturer of industrial cameras, has launched a series of 27 CCD cameras. The models are housed in a robust industrial casing with a C/CS lens mount.
Hitachi Kokusai Electric Europe has released eight CCD cameras with Mini Camera Link and Power over Camera Link interface with RAW data output
Videor has introduced products from Fujinon and Tamron as well as the extended USB camera series from Sentech.
Eastman Kodak Company has introduced an image sensor with low-light sensitivity developed through the integration of two advanced image sensor technologies.
Wenglor has introduced an Ethernet-compatible CCD Scanner that recognises barcodes at distances of up to 320mm
VDS Vosskühler has introduced the CCD-16000, a new 16-Megapixel CCD Camera. The camera is based on a 36 x 24mm sensor. It can produce images at rates of 2fps, with 12-bit dynamics.
SVS-Vistek has launched the two Megapixel CCD camera SVS274, which is the latest edition to its range of the SVCAM cameras.
Moritex has introduced several new accessories to extend the capabilities of its range of compact and low mass CCTV lenses.
Moritex and Schott have introduced the CCTV MP3 series of lenses for use in machine vision. The lenses mean industrial processes can be monitored with image resolution of 3 megapixels at distances of up to 0.2m
Olympus has introduced the Cell*3.0 family range of imaging systems, an integrated collection of software tools and hardware systems that provides a fully flexible and modular range of imaging products.
Olympus says its latest cellSens software release, version 1.8, offers flexible and user-centric imaging, processing, analysing and reporting
Olympus has released its Database Solution module for the cellSens Dimension software suite
Olympus has introduced its CellSens software for life science imaging applications, consisting of three packages: CellSens Entry, CellSens Standard and CellSens Dimension
Olympus has released version 1.7 of its cellSens software, which includes functionality for multi-well imaging studies
Olympus has launched the Cell* family range of mutually compatible imaging systems, combining excellent performance with user-friendly operation.
Olympus has launched the Cell* family range of mutually compatible imaging systems. Cell^D, Cell^F and Cell^P programmes build on the Cell^A and Cell^B entry-level packages, offering advanced life science imaging applications.
Olympus has introduced the cell^frap module for the Xcellence live cell imaging and manipulation system
Citius has released the Centurino C100 high speed camera, capable of 100,000 frames per second. A CMOS sensor provides 1280 x 1024 resolution
Cordex Instruments, a developer of portable equipment for explosive atmospheres, has released the Centurion XPG ATEX certified 5 Megapixel digital camera with strobe flash.
AutoVimation has introduced the Chameleon series of aluminium enclosures for cameras
Point Grey Research has launched the Chameleon line of USB 2.0 digital cameras, generating high quality 1296(W) x 964(H) monochrome or raw Bayer colour images at 18fps.
PCS Industries has announced the addition of the Checker 232 vision sensor model to its Checker 200 series. The model provides reliable inspection results on rapid production lines.
Cognex has introduced the Checker 232 model to its Checker vision sensor product line. The camera is designed to inspect small features over a wide area.
Cognex, a leading supplier of machine vision systems and vision sensors, has expanded its Checker vision sensor product line with the Checker 252 model.
Cognex, a supplier of machine vision systems and vision sensors, has added the Checker 3G series to its Checker vision sensor product line.
Cognex has added two high resolution models to its line of Checker vision sensors: the Checker 3G7 and Checker 272. The inspection sensors can both detect and inspect parts.
Cognex has added the Checker 4G series to its line of vision sensors, offering powerful and easy-to-use setup
Cognex has introduced a line of position tools, coloured lighting and filters, and a new sensor model, Checker 4G7X, to expand the practical applications of its Checker 4G line of machine vision sensors
Leutron Vision has released the CheckSight PC-camera with 1.6GHz Intel Atom processor, large choice of sensors and a multitude of interfaces
XenICs has released its high-end, power PC-based, high-speed imaging system Cheetah, which is an InGaAs focal-plane array camera that covers the standard SWIR (short-wave infrared) wavelength area 0.9 to 1.7µm - with all control and communications c
EVT has released the ChipControl command set, a easy-to-handle software tool for the inspection of semiconductor and electronic components
EVT has released ChipEye 5Side, the ChipControl command set with five side inspection, as a complete system
Schneider-Kreuznach has released four C-mount lenses for industrial applications in the Cinegon and Xenoplan series
BitFlow has introduced the model CL4-F frame grabber featuring interfaces for two independent base, medium or full Camera Link digital video cameras
Kehl-based Optronis' CL4000CXP camera, a 4 Megapixel model with a high-speed CoaXPress interface, has now been upgraded with the GenICam standard
Andor Technology, a leader in scientific imaging, spectroscopy solutions and microscopy systems, has engineered higher performance from its sensitive interline CCD camera, the Andor Clara
Andor Technology, a provider of scientific imaging and spectroscopy solutions, has launched the Clara interline CCD camera based around the 1.3 Megapixel ICX285 sensor from Sony.
Andor Technology has launched the Clara E camera, extending the available choice from the sensitive interline CCD camera range
Clemex Technologies have added pre-programmed international standards to its computerised microscopy image systems
Toshiba Teli has released the Clever Dragon camera (model CSCLV90BC3), which features a 20 x 20 x 20mm cube durable housing
Toshiba Teli has introduced the CleverDragon CSC12M25BMP19 camera, aimed at the most demanding requirements of industrial image processing.
AutoVimation has released a multi-stage climate control concept enabling camera systems to be used in adverse environments
Cmosis has introduced an image sensor concept yielding low dark noise and using dual gain readout to increase the dynamic range above 89.5dB
Viscom has introduced a closed tube for the inspection system X7056, suitable for high performance applications with short throughput times
JAI has introduced a new version of its 0.3 Megapixel industrial CCD remote head camera equipped with a standard GigE Vision/GenICam compliant digital interface
JAI has introduced the CM-030OMCL-RH, a 0.3 Megapixel industrial CCD camera with a remote head lens and Power over Camera Link (PoCL) digital interface
JAI has released four new digital progressive scan CCD cameras: CM-140 MCL, CB-140 MCL, CM-200 MCL and CB-200 MCL. They are Mini Camera Link versions of JAI's CV-A1 and CV-A2 cameras.
Alrad Imaging has added the CMC-4000, the latest member of VDS Vosskühler's range of high speed cameras, to its product portfolio
VDS Vosskühler has released the CMC-4000 camera, which achieves up to 200 images per second at a resolution of 2,320 x 1,726 pixels
VDS Vosskühler has enhanced its CMC-4000 camera, which now achieves nearly 400 images per second at a resolution of 2,320 x 1,726 pixels
Kappa optronics has released a new platform for customer-specific camera design with high definition, embedded Linux, and CMOS sensor
Alrad Imaging now offers a series of ultra compact CMOS cameras from The Imaging Source, an international manufacturer of cameras for industrial image processing
Alrad has added the CMOS Sensor range of state-of-the-art CMOS image sensors to its product range.
Deposition Sciences (DSI) has developed an improved CMOS IR filter specially developed to reduced the infrared and transmit the visible wavelengths in camera applications
Cmosis, a developer and supplier of high-end CMOS image sensors, has added a new member to its CMV CMOS image sensor family: the 12 Megapixel CMV12000
Belgian startup Cmosis has introduced its first off-the-shelf high-resolution CMOS image sensor. The Cmosis CMV2000 is specifically designed for demanding machine vision applications
Cmosis has introduced two CMV sensor models: a 20 Megapixel image sensor, the CMV20000, for demanding industrial applications, and the 12 Megapixel CMV12000
Cmosis has developed a new member of its off-the-shelf CMOS image sensors: the 0.3 Megapixel CMV300
ISVI, a company specialising in advanced camera technology for automation, high speed inspection, and PCB and wafer inspection, has introduced two CoaXPress cameras
Stemmer Imaging has introduced a selection of cameras and frame grabbers that make use of the new CoaXPress data transmission standard
Adimec's Quartz and Opal cameras have both been certified as fully compliant with the CoaXPress interface standard version 1.0
EqcoLogic has started shipping production volumes of its CoaXPress transceiver products, used for high performance imaging applications in industry, medicine and defence
Multipix Imaging has added the Cobra Flex from ProPhotonix to its product portfolio. The lighting system is designed for high-speed line scan and web inspection
ProPhotonix has launched the Cobra Max, an increase to the power and function of its Cobra product line of machine vision lighting solutions
StockerYale has introduced the Cobra Slim that builds on the success of the original Cobra and focuses on the complete range of linescan illumination requirements including fluorescents and metal halide.
Stockeryale has launched the Cobra Slim line scan illumination, a chip-on-board reflective array available from Multipix Imaging
NorPix, a leading developer of high speed digital recording solutions, has launched a new codec for H.264 compression
Cognex has released Cognex Connect for DataMan ID readers, a comprehensive suite of communication capabilities including EtherNet/IP and Profinet
Cognex has released the Cognex Explorer control centre. This utility displays a graphical view of all Cognex vision systems, ID readers and visualisation systems connected to the network
Cognex has announced Linux support for the Cognex Vision Library (CVL). The CVL 7.0 CR7 release supports Linux kernel 2.6 and later versions
Edmund Optics now offers Coherent high performance OBIS laser systems
Schott has introduced a new addition to its ColdVision family of products, the MaVi-S, a machine vision strobe light source for use in industrial image processing.
Sick (UK), a sensor and sensing systems manufacturer, has launched the ColorRanger E, providing high-speed 3D scanning and colour imaging
The ColorSens product line of Eye Vision Technology (EVT) works with the Advanced Color Match System providing fast and reliable colour inspection.
Micro-Epsilon Eltrotec has introduced a colour sensor series. The ColorSensor OT is intended for the recognition of colour nuances and greyscale on shiny and structured surfaces
Micro-Epsilon has launched a range of colour recognition sensors to the UK market
Stemmer Imaging has added the colour version of Dalsa's Boa smart cameras to its product portfolio
Firstsight Vision is now shipping the latest release of Common Vision Blox (CVB), the versatile hardware-independent imaging toolkit from Stemmer Imaging.
Firstsight Vision offers a new image processing capability. The latest version of the Common Vision Blox (CVB) imaging toolkit makes use of the GPU processor on the PC's graphics card.
Stemmer Imaging's programming library for imaging applications, Common Vision Blox (CVB), has been successfully validated by the Automated Imaging Association (AIA) as meeting the requirements of the GigE Vision standard.
Stemmer Imaging has launched version 10.2 of the Common Vision Blox (CVB) programming library
Stemmer Imaging has released Common Vision Blox 2011 for Windows 64-bit
Version 9.0.1 of Common Vision Blox, Stemmer Imaging's machine vision software library meets the new standards of GigE Vision and GenICam.
Premier Electronics has released a shutterless version of the Compact Eye, a compact, low-powered thermal imager
Prosilica has released the GE1050 megapixel CCD camera, a high-resolution, CCD camera with Gigabit Ethernet interface capable of running at 60fps at 1000 x 1000 resolution.
A shutterless version of the CompactSec, low powered thermal imager is now available from Premier Electronics
A ready-reference guide to direct part marking (DPM) technology has been published by Sick, a manufacturer of intelligent sensors and sensor solutions.
Framos now supplies the TEC-V7X 5 Megapixel lens from Computar. It operates both as a 7x macro zoom lens and as a telecentric lens
Quest Innovations has released the Condor-1000 MS1-FV. Specific selected customers have been testing this Foveon based camera with good results
Quest Innovations has released the Condor-1000 MS3-RGB120 as its sixth addition to the Condor1000 multispectral camera range
Quest Innovations has released the Condor-1000 MS5 285. The model is a 2/3-inch prism camera based on the Sony ICX285 sensor, an interline CCD solid-state image sensor with a square pixel array
Carl Zeiss and Digital Surf has signed an agreement enabling Carl Zeiss to provide ConfoMap software. ConfoMap is a surface imaging and analysis software for confocal microscopes and compound microscopes for topographical research
Pacer has introduced a colour contact image sensor (CIS) from Tichawa Vision, which promises large reading width, high resolution and scan speeds.
Stemmer Imaging has added Contact Image Sensors (CIS) to its product portfolio, which offer an alternative approach to conventional line scan cameras for industrial web applications
Flir Systems has added a contrast optimiser to its top-of-the-range B-Series model, the B600. The algorithm allows details in contrast-rich infrared images to be seen with greater distinction.
VDS Vosskuhler has released its Cool-6000, a cooled and high resolution full frame camera. The camera delivers 3072 (H) x 2048 (V) pixels in 14-bit digitisation.
Kappa has released a range of cooled cameras with controlled double stage Peltier cooling. The cameras offer high performance for low light applications with long exposure times.
Alrad Imaging has introduced two cooled CCD cameras from German manufacturer, VDS Vosskühler
Fairchild Imaging, based in the US, has introduced a line of low-noise, multi-port, cooled scientific cameras based on a CCD sensor, (4096 x 4096 pixels, 15µm pitch).
Wenzel ScanTec has introduced the Core M. The optical high speed measuring system is a fast and efficient solution for testing serial parts in production
Wenzel ScanTec has launched Core, a flexible optical high-speed gauging system. Core is designed to measure production parts with short inspection cycle times
German-based provider of camera and illumination systems, Chromasens, has introduced Corona - a high performance LED line scan illuminator developed for line scan camera applications.
Chromasens has introduced the LED illumination system Corona II. It offers exceptionally homogeneous light distribution and high-performance line illumination for low-noise colour image capture
Chromasens has optimised the Corona LED illumination system, designed for use in line scan camera applications
FEI has released a suite of solutions for correlative light and electron microscopy
Xenics has released the Cougar-640, a high-performance InGaAs camera for extreme low light imaging applications in the shortwave infrared (SWIR) range
Olympus has released its Count and Measure Solution module for the cellSens Dimension software suite. The module makes it simple to design and automate image analysis protocols
The Schneider Group has introduced a 90mm f4.5 lens to its line of high-resolution line scan lenses. The CPN 4.5/90 lens provides magnification from 0.2x to 0.4x.
The CR Series of compact GigE Vision high speed cameras from Optronis are now available from Stemmer Imaging. The series features the ultra sensitive CR600x2 and the ultrafast CR5000x2.
MaxxVision has introduced new GigE Vision cameras from its partner Crevis, which incorporate Trigger over Ethernet functionality
Andor Technology has implemented the Cropped Sensor mode as a standard, user-selectable feature with its iXon+, Newton and iKon range of high-performance EMCCD (Electron Multiplying CCD) and CCD cameras.
Toshiba Teli has launched the full HD CMOS camera, CSDW2M60CM28, offering high-resolution full-HD (1,920 x 1,080) imaging at a frame rate of up to 60fps
Toshiba Teli has launched the colour camera CSF5M7C3L18NR specifically for application areas such as microscopy and image measurement that require single pixel colour rendering.
Toshiba Teli's CSL8000CL camera model is a 12K pixel resolution, high-speed line scan camera that can be commissioned to digitally output both 8-bit colour and 8-bit/10-bit monochrome images simultaneously.
JAI has introduced the CV-A20CL, which features a resolution of 1920 x 1080 pixels within a 2/3-inch format imager, providing 60fps over a Camera Link interface.
JAI's CV-L107CL is a 3CCD, prism-based colour line scan camera that targets industrial inspection applications. The CV-L107CL line scan camera is suitable for high-speed inspection of large flat objects or webs.
JAI has released a new, innovative digital 3CCD industrial progressive scan RGB colour camera (CV-M9 GE) featuring GigE Vision interface.
Stemmer Imaging has introduced a CVA camera series for traffic solutions. The cost-effective, GigE camera series ensures high-speed data transfer using Gigabit Ethernet and 100Mb LAN.
CVB 2011 CameraSuite MultiOS, the latest version of Stemmer Imaging's high-performance and easy-to-install development environment for GigE Vision cameras, can now be used with a variety of operating systems
Stemmer Imaging has released its hardware-independent SDK CVB CameraSuite for the 64-bit operating systems Windows x64 and Linux64
Stemmer Imaging has added the CVB Match 3D tool to its Common Vision Blox software, offering a practical approach for 3D imaging.
Stemmer Imaging has introduced its CVB Movie Interactive user interface, making it easier for users to put together systems for recording sequences and archiving images
Firstsight Vision has introduced its parent company Stemmer Imaging's latest version of Common Vision Blox, its hardware independent programming library.
Following on from the launch of its CVC GigE camera range, Stemmer Imaging has released HD models for a wide variety of applications and markets
Stemmer Imaging can now provide system developers with specialised monochrome and colour cameras that offer ultra-high resolution yet use standard lens technology
Stemmer Imaging has launched the CVO (Common Vision Optics) range of Megapixel CCTV lenses, including two day/night variants.
Automation Technology has introduced its CX line of compact detector-heads for high-speed 3D scanning
Machine vision technology specialist BitFlow has introduced the Cyton CXP4 four-channel frame grabber, based on the CoaXPress standard
Not listed? Click here